Lots of '88 Parts...suspension, cradles, brakes, skeleton
Moderator: crzyone
Lots of '88 Parts...suspension, cradles, brakes, skeleton
Hey gang, I've got a bunch of '88 parts for sale. These are all from an '88 with the 2.5 and auto trans that was in pretty good shape mechanically, but pretty rough shape cosmetically. The paint and interior are ratted out pretty bad, but the suspension is in surprisingly good shape. I tried to pull as many of the '88 specific or otherwise rare parts off that I could so they didn't get sent to the crusher, the rear suspension links, throttle cable, and coolant tubes are spoken for. The parts are all in good condition or better, absolutely zero rust and includes mounting hardware, nut plates, etc. where applicable.
All prices below include shipping to the lower 48 via UPS ground unless otherwise noted!
$45 each - '88 Front control arms (Right lower sold)
$35 each - '88 Front knuckles
These have all been split up, they're just loosely assembled to simplify storage. No torn boots, no stripped hardware, etc.
I prefer paypal for payments (nashco at hotmail dot com).
Thanks!
Bryce
Edited for items sold
SOLD - Perfect center console skeleton....I couldn't believe it, I've never seen one without any stripped holes, cracks, etc...but here one is!
SOLD - '88 Front hubs
SOLD - '88 calipers with brake hoses and pads
SOLD - '88 Front suspension cradle, Greyhound is probably the best way to ship this bulky item.
SOLD - '88 steering rack
SOLD - '88 Rear cradle, Greyhound is probably best way to ship this bulky item. Cradle will be degreased and pressure washed before shipping.
SOLD - All three '88 e-brake cables in great condition
All prices below include shipping to the lower 48 via UPS ground unless otherwise noted!
$45 each - '88 Front control arms (Right lower sold)
$35 each - '88 Front knuckles
These have all been split up, they're just loosely assembled to simplify storage. No torn boots, no stripped hardware, etc.
I prefer paypal for payments (nashco at hotmail dot com).
Thanks!
Bryce
Edited for items sold
SOLD - Perfect center console skeleton....I couldn't believe it, I've never seen one without any stripped holes, cracks, etc...but here one is!
SOLD - '88 Front hubs
SOLD - '88 calipers with brake hoses and pads
SOLD - '88 Front suspension cradle, Greyhound is probably the best way to ship this bulky item.
SOLD - '88 steering rack
SOLD - '88 Rear cradle, Greyhound is probably best way to ship this bulky item. Cradle will be degreased and pressure washed before shipping.
SOLD - All three '88 e-brake cables in great condition
Last edited by Nashco on Mon Jun 01, 2009 2:26 pm, edited 8 times in total.
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
Dibs on the console skeleton! Mine is pretty much kaput. Shipping to 48073?
'88 Fiero GT- 3800 Turbo Best E.T. 11.36 Best MPH 121.50 (Sold and gone)
2021 Hyundai Veloster-N (SCCA Solo D-Street)
2004 Mazda RX-8 (SCCA Solo STX)
WNY SCCA-Region Auto-X Program Chair
2021 Hyundai Veloster-N (SCCA Solo D-Street)
2004 Mazda RX-8 (SCCA Solo STX)
WNY SCCA-Region Auto-X Program Chair
-
- Peer Mediator
- Posts: 15629
- Joined: Wed Nov 24, 2004 11:13 pm
- Location: In the darkness, where fear and knowing are one
- Contact:
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
OH, you want real prices for stuff... Darn... I was gonna try to Fiero you down a bit.
-
- Posts: 2908
- Joined: Thu Dec 20, 2007 2:47 pm
- Location: Columbus, Ohio
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
Nashco wrote:
All prices below include shipping to the lower 48 via UPS ground unless otherwise noted!
Just giving you shit Akursed.
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
I'm interested in the rear calipers, does the ebrake mechanism work?
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
Nothing is seized up, the cables were in good working order and are for sale as well. I never actually tested them out, though. At $25 each for a loaded caliper with hose shipped to your door, I'd say it's worth a shot. If you want, I'll pull the guaranteed-fully-functioning ones off my Formula for $50 each instead of $25 and I'll put these $25 ones on my Formula.Jinxmutt wrote:I'm interested in the rear calipers, does the ebrake mechanism work?
Bryce
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
You're welcome to try, but I don't think you'll have much successs. Since I'm already including shipping in the above prices and they're all in great shape with absolutely no rust, I thought the prices were already pretty damn low.The Dark Side of Will wrote:OH, you want real prices for stuff... Darn... I was gonna try to Fiero you down a bit.
However, I am *very* open to trades if you've got stuff I might be able to use for my GRM $2009 Fiero, I'm in bad need of some poly bushings and rear struts, new or used. There are also some things I don't need but want...got any Northstar swap parts like flashed ECMs (for manual trans) or redrilled flywheels? Lightweight starter for 60 degree V6? Custom suspension stuff? I'm open minded and willing to wheel and deal with trades.
Bryce
-
- Posts: 472
- Joined: Wed Nov 17, 2004 11:26 pm
- Location: oconomowoc WI
- Contact:
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
Rear calipers still available? Jinx want them?
*SOLD* 95 3.4 DOHC- 96-97 p&p lower intake, custom upper intake, custom cams, ported exh manis, 180* t-stat.
T-62 Turbonetics T3/T4, air-liquid intercooled, Synapse 40mm, Greddy RS, Haltech E6K.
1987 GT, lowered, KYB's, clutchnet 6 puck, G/A brakes
T-62 Turbonetics T3/T4, air-liquid intercooled, Synapse 40mm, Greddy RS, Haltech E6K.
1987 GT, lowered, KYB's, clutchnet 6 puck, G/A brakes
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
All the calipers are gone.fieromadman wrote:Rear calipers still available? Jinx want them?
Bryce
-
- Peer Mediator
- Posts: 15629
- Joined: Wed Nov 24, 2004 11:13 pm
- Location: In the darkness, where fear and knowing are one
- Contact:
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
You're right. Those are realistically priced to move with non-Fiero owners.Nashco wrote:The Dark Side of Will wrote:Since I'm already including shipping in the above prices and they're all in great shape with absolutely no rust, I thought the prices were already pretty damn low.
Just not the "giving away all my worldly possessions so I can go live in a monastery" that Fiero owners want. If I actually needed them and didn't just want to add another cradle to my inventory, I'd offer.
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
Updated inventory above.
Bryce
Bryce
-
- Posts: 4
- Joined: Sun Nov 30, 2008 11:28 am
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
any chance you have the front and rear facias and supports?
Brandon Edmonds
1998 Contour SVT (new sexiness)
1996 Taurus SHO (traded)
1984 Fiero (bare rust free frame, to be the basis for my car)
1991 Honda VFR750F interceptor (V4 sex)
1998 Contour SVT (new sexiness)
1996 Taurus SHO (traded)
1984 Fiero (bare rust free frame, to be the basis for my car)
1991 Honda VFR750F interceptor (V4 sex)
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
Facias are in rough shape (bad paint, air dam is trashed from a rough tow), I might be able to do the supports. Some of those are pretty bulky (long) and I'm thinking shipping would be steep. How bad do you want them?Flyguyeddy wrote:any chance you have the front and rear facias and supports?
Bryce
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
I got the center console in yesterday and it made it her in one piece! Thanks man. This is an integral part of my interior revitalization.
'88 Fiero GT- 3800 Turbo Best E.T. 11.36 Best MPH 121.50 (Sold and gone)
2021 Hyundai Veloster-N (SCCA Solo D-Street)
2004 Mazda RX-8 (SCCA Solo STX)
WNY SCCA-Region Auto-X Program Chair
2021 Hyundai Veloster-N (SCCA Solo D-Street)
2004 Mazda RX-8 (SCCA Solo STX)
WNY SCCA-Region Auto-X Program Chair
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
I'm glad it made it unscathed!AkursedX wrote:I got the center console in yesterday and it made it her in one peice! Thanks man. This is an integral part of my interior revitalization.
Bryce
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
Bump for updated list in the first post.
Bryce
Bryce
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
Updated inventory above.
Bryce
Bryce
- Shaun41178(2)
- Posts: 8464
- Joined: Fri Nov 19, 2004 7:12 pm
- Location: Ben Phelps is an alleged scammer
Re: Lots of '88 Parts...suspension, cradles, brakes, skeleton
do you have the proportioning valve for the brakes still?
FieroPhrek working on that ls4 swap for 18 years and counting now. 18 years!!!!! LOL
530 whp is greater than 312
530 whp is greater than 312