Honestly, I'd love to pose with a Bebe gun on camerapontiackid86 wrote:Nothing. I know at least the basics of using a computer. I have better things to do with my time than pointing a camera and a bebe gun at a computer and making myself look like a total retard.The Dark Side of Will wrote:At least lowlux posts original content to Youtube. What have you done for karma lately?
Lowlux's ultimate thread on multiple car problems!!!
Moderators: The Dark Side of Will, Series8217
-
- Posts: 2908
- Joined: Thu Dec 20, 2007 2:47 pm
- Location: Columbus, Ohio
Re: Lowlux's ultimate thread on multiple car problems!!!
Re: Lowlux's ultimate thread on multiple car problems!!!
I consider using all of the letters of the alphabet a basic computer skill.pontiackid86 wrote: Nothing. I know at least the basics of using a computer.
88GT 3.4 DOHC Turbo
Gooch wrote:Way to go douche. You are like a one-man, fiero-destroying machine.
-
- Peer Mediator
- Posts: 15629
- Joined: Wed Nov 24, 2004 11:13 pm
- Location: In the darkness, where fear and knowing are one
- Contact:
Re: Lowlux's ultimate thread on multiple car problems!!!
You mean BB Gunns?CincinnatiFiero wrote:Honestly, I'd love to pose with a Bebe gun on camerapontiackid86 wrote:Nothing. I know at least the basics of using a computer. I have better things to do with my time than pointing a camera and a bebe gun at a computer and making myself look like a total retard.The Dark Side of Will wrote:At least lowlux posts original content to Youtube. What have you done for karma lately?
http://www.piercemattie.com/blogs/Bebe_ ... _brand.jpg
-
- Posts: 2908
- Joined: Thu Dec 20, 2007 2:47 pm
- Location: Columbus, Ohio
Re: Lowlux's ultimate thread on multiple car problems!!!
That's just foul, my pic > yours.
Re: Lowlux's ultimate thread on multiple car problems!!!
Agreed.
88GT 3.4 DOHC Turbo
Gooch wrote:Way to go douche. You are like a one-man, fiero-destroying machine.
-
- Posts: 1010
- Joined: Sat Mar 04, 2006 12:19 am
- Location: The Peoples Republic of Kalefornya
- Contact:
Re: WHAT THE FUCK IS THIS HOLE
There are several holes in each of those pictures, but does it really matter? Put the bolt back and leave it there. Problem solved,
<Insert Sig Here>
Re: 1988 fiero suspension swap
yes
2002 Camaro SS
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50
-
- Peer Mediator
- Posts: 15629
- Joined: Wed Nov 24, 2004 11:13 pm
- Location: In the darkness, where fear and knowing are one
- Contact:
Re: 1988 fiero suspension swap
Swapping cradles is even harder than fixing the alternator.
- TheFieroBoy
- Posts: 118
- Joined: Sat May 03, 2008 8:02 pm
Re: 1988 fiero suspension swap
Have fun dropping the motor on your face.
-
- Posts: 2908
- Joined: Thu Dec 20, 2007 2:47 pm
- Location: Columbus, Ohio
Re: Lowlux's ultimate thread on multiple car problems!!!
They haven't made yellow poly in years, that must be old as hell.
Re: Lowlux's ultimate thread on multiple car problems!!!
88GT 3.4 DOHC Turbo
Gooch wrote:Way to go douche. You are like a one-man, fiero-destroying machine.
- Series8217
- 1988 Fiero Track Car
- Posts: 5989
- Joined: Thu Jun 02, 2005 9:47 pm
- Location: Los Angeles, CA
Re: fixing... small bullshit
The white spot on the roof is oxidized clearcoat. There isn't any way to fix it except to get it repainted..
-
- Posts: 1062
- Joined: Wed Jun 29, 2005 2:28 am
- Location: Los Angeles, CA
Re: FORGED MOTOR MOUNTS.... coming soon..
Sand casting is not forging. Wildly pounding on the red hot metal with a hammer won't do much to help, either. And even if somehow you ended up with something better than a mix of solidified carbon chunks, molten scrap metal of various origins, and impurities, harding it to ~Rc 60 would make a part as brittle as glass. Rc 40 would be a better ballpark, and that's probably a little on the hard side as well, depending on what alloy and what application.
Long story short, there's a really good possibility that HALF the thickness worth of rolled, low carbon bar stock would hold up better, be cheaper, and take less work... Don't bother.
Long story short, there's a really good possibility that HALF the thickness worth of rolled, low carbon bar stock would hold up better, be cheaper, and take less work... Don't bother.
-
- Posts: 1062
- Joined: Wed Jun 29, 2005 2:28 am
- Location: Los Angeles, CA
Re: FORGED MOTOR MOUNTS.... coming soon..
That said, if you want to make some gangster ass engine mounts, machine them out of Cro-Mo steel bar stock of known quality and alloy, and have them heat treated.
-
- Posts: 2446
- Joined: Mon Jan 07, 2008 1:36 pm
Re: FORGED MOTOR MOUNTS.... coming soon..
why even stress it? You're gonna have 190 horses, stock style mounts are more than good enough. They were designed for abuse and crash safety as well as nice driveability. Solid mounting is just a good way to fatigue the cradle and stress the trans.
-
- Posts: 1062
- Joined: Wed Jun 29, 2005 2:28 am
- Location: Los Angeles, CA
Re: Ecotec...
No.
- Series8217
- 1988 Fiero Track Car
- Posts: 5989
- Joined: Thu Jun 02, 2005 9:47 pm
- Location: Los Angeles, CA
Re: Ecotec...
yes
-
- Posts: 252
- Joined: Sun Dec 14, 2008 10:11 pm
Re: Rust - son of bitch
You dont want to slow the rust down. That is like putting a bandaid on a cut that needs stitches. The best thing to do is cut out the rusted ares before it reaches unrusted metal. Than buy a welder and weld sheet metal into its place. Do not skip cutting the rust area out or the rust will infect the new sheet metal you put in place.
-
- Posts: 252
- Joined: Sun Dec 14, 2008 10:11 pm
Re: fixing... small bullshit
Its not worth it. The sun beats onto it and causes it to oxidize rather quickley. plus real carbonfiber is going to be expensive.lowlux wrote:SHIT. they make some shit i seen it on a 350z to make the roof look like its carbon fiber? i think it sticks on..