Page 1 of 1
Accel 19#'rs
Posted: Thu Dec 29, 2005 11:52 pm
by Shaun41178(2)
10k miles on them. Accel fuel injectors. Set of 6. good condition. WOuld be good for a 3.4 with a little bit more airflow or a custom chip.
Straight bolt in with no mods. Used them on my 2.8 for a bit but way too much fuel.
$50
Posted: Sat Jan 07, 2006 1:45 pm
by Shaun41178(2)
ttt
Posted: Sat Jan 07, 2006 11:31 pm
by Series8217
I think there's only two t's in Twin Turbo
Posted: Wed Jan 18, 2006 12:48 am
by Oversteer
Those things still sitting around?
Posted: Wed Jan 18, 2006 6:11 pm
by Shaun41178(2)
Still around yes.
Posted: Wed Jan 18, 2006 10:25 pm
by eHoward
I've got a set too. Mine's $200. 5k miles.
Posted: Wed Jan 18, 2006 10:27 pm
by donk_316
ive still got #30s for sale.
Posted: Thu Jan 19, 2006 7:32 am
by Kohburn
i've got some that are supposed to be 21 pounders plus a stock 3.4dohc 21 pound set..
Posted: Thu Jan 19, 2006 11:57 am
by donk_316
Oh yeah! I have a set of stock 96 3.4L dohc injectors too.
Posted: Sat Jan 21, 2006 2:42 pm
by eHoward
bump for Shuan.....you can bling up your fuel injector rail big time guys:;
Posted: Sun Jan 29, 2006 10:42 pm
by Oversteer
Stupid question. $50 each or $50 for the set?
Posted: Sun Jan 29, 2006 10:54 pm
by Shaun41178(2)
set.
Posted: Fri Feb 03, 2006 1:53 pm
by Snowcrash
I'd also be intrested.
Posted: Fri Feb 03, 2006 7:26 pm
by Shaun41178(2)
interested in what? My injectors? If so send me money and you can own them.
Posted: Sat Feb 04, 2006 12:29 pm
by Snowcrash
I wasn't sure if Oversteer was in the process already. Also, I'm not sure if this will be overkill for my engine. Going 3.1 with the ported heads and such.
Posted: Sat Feb 04, 2006 12:32 pm
by Shaun41178(2)
first person so send me money gets them.
paypal addy is
SMHammitt1@hotmail.com
$55 shipped to your door.
Posted: Sat Feb 04, 2006 12:33 pm
by Snowcrash
You are fast! I was editing when you replied! doh! I just need to know if they are overkill or not for me.
Posted: Sat Feb 04, 2006 12:42 pm
by Shaun41178(2)
I won't lie. They will probably be too big yes. Stock injectors can supply enough fuel for a 3.1 with ported everything.
If you got a custom chip to run the 19's then they would work, but thats more money to spend to put in the same amount of fuel.
Stay with stock injectors for your 3.1 unless you plan on doing forced induction or nitrous later on.
i used these injectors on my 2.8 with a dry kit and was almost maxing them out on stock fuel pressure. Very easy to bump the pressure though and have a ton more room to work with, but trying to keep things the same between runs on the dyno to show gains and losses
Posted: Sat Feb 04, 2006 1:10 pm
by Snowcrash
Thanks for the info. there's gonna be no forced induction here, so I guess I'll have to pass. Thanks!