Accel 19#'rs

Shaun41178(2) · Post by **Shaun41178(2)** » Thu Dec 29, 2005 11:52 pm

10k miles on them. Accel fuel injectors. Set of 6. good condition. WOuld be good for a 3.4 with a little bit more airflow or a custom chip.

Straight bolt in with no mods. Used them on my 2.8 for a bit but way too much fuel.

$50

Shaun41178(2) · Post by **Shaun41178(2)** » Sat Jan 07, 2006 1:45 pm

Series8217 · Post by **Series8217** » Sat Jan 07, 2006 11:31 pm

I think there's only two t's in Twin Turbo

Oversteer · Post by **Oversteer** » Wed Jan 18, 2006 12:48 am

Those things still sitting around?

Shaun41178(2) · Post by **Shaun41178(2)** » Wed Jan 18, 2006 6:11 pm

Still around yes.

Post by **eHoward** » Wed Jan 18, 2006 10:25 pm

I've got a set too. Mine's $200. 5k miles.

donk_316 · Post by **donk_316** » Wed Jan 18, 2006 10:27 pm

ive still got #30s for sale.

Kohburn · Post by **Kohburn** » Thu Jan 19, 2006 7:32 am

i've got some that are supposed to be 21 pounders plus a stock 3.4dohc 21 pound set..

donk_316 · Post by **donk_316** » Thu Jan 19, 2006 11:57 am

Oh yeah! I have a set of stock 96 3.4L dohc injectors too.

Post by **eHoward** » Sat Jan 21, 2006 2:42 pm

bump for Shuan.....you can bling up your fuel injector rail big time guys:;

Oversteer · Post by **Oversteer** » Sun Jan 29, 2006 10:42 pm

Stupid question. $50 each or $50 for the set?

Shaun41178(2) · Post by **Shaun41178(2)** » Sun Jan 29, 2006 10:54 pm

Snowcrash · Post by **Snowcrash** » Fri Feb 03, 2006 1:53 pm

I'd also be intrested.

Shaun41178(2) · Post by **Shaun41178(2)** » Fri Feb 03, 2006 7:26 pm

interested in what? My injectors? If so send me money and you can own them.

Snowcrash · Post by **Snowcrash** » Sat Feb 04, 2006 12:29 pm

I wasn't sure if Oversteer was in the process already. Also, I'm not sure if this will be overkill for my engine. Going 3.1 with the ported heads and such.

Shaun41178(2) · Post by **Shaun41178(2)** » Sat Feb 04, 2006 12:32 pm

first person so send me money gets them.

paypal addy is SMHammitt1@hotmail.com

$55 shipped to your door.

Snowcrash · Post by **Snowcrash** » Sat Feb 04, 2006 12:33 pm

You are fast! I was editing when you replied! doh! I just need to know if they are overkill or not for me.

Shaun41178(2) · Post by **Shaun41178(2)** » Sat Feb 04, 2006 12:42 pm

I won't lie. They will probably be too big yes. Stock injectors can supply enough fuel for a 3.1 with ported everything.

If you got a custom chip to run the 19's then they would work, but thats more money to spend to put in the same amount of fuel.

Stay with stock injectors for your 3.1 unless you plan on doing forced induction or nitrous later on.

i used these injectors on my 2.8 with a dry kit and was almost maxing them out on stock fuel pressure. Very easy to bump the pressure though and have a ton more room to work with, but trying to keep things the same between runs on the dyno to show gains and losses

Snowcrash · Post by **Snowcrash** » Sat Feb 04, 2006 1:10 pm

Thanks for the info. there's gonna be no forced induction here, so I guess I'll have to pass. Thanks!