What would you do? A shop "borrows" your car...
Moderator: crzyone
- Series8217
- 1988 Fiero Track Car
- Posts: 6078
- Joined: Thu Jun 02, 2005 9:47 pm
- Location: Los Angeles, CA
I must say I am impressed by how calm you seem, I'm not sure what I would do in a similiar situtation.
From my point of view he stole the car. Working at the shop or not, as soon as he was doing something other than what you had authorized he basically stole it.
Is he or the shop going to be paying for all the replacements you are doing?
Is he or the shop going to be paying for all the replacements you are doing?
-
- Posts: 599
- Joined: Sun Feb 19, 2006 12:53 am
- Location: puyallup washington
- Contact:
dude, I woulda beat the ever living shit out of that guy, I am not kidding, I woulda grabed him when he was alone, held a gun to his head, and let him know he was selling his car, and anything else he had, tell he had enough money for a complete engine swap, and money for the labor, and extra money for the bullshit time i had to go thru.
then after i recived all that, I woulda had him fired, then as his life couldn't get any worse, I beat the ever living shit out of him. and then told him to expect me back again a few more times, just to keep his pansy ass scared.
you know that dude took ur car out and abused the hell out of. wonder how many times he drifted ur shit. check the local street races, but there was a skyline there the other night.
then after i recived all that, I woulda had him fired, then as his life couldn't get any worse, I beat the ever living shit out of him. and then told him to expect me back again a few more times, just to keep his pansy ass scared.
you know that dude took ur car out and abused the hell out of. wonder how many times he drifted ur shit. check the local street races, but there was a skyline there the other night.
-
- Posts: 599
- Joined: Sun Feb 19, 2006 12:53 am
- Location: puyallup washington
- Contact:
Stimpy is partially correct. I wrote up a contract that covers my ass and my car at the shops expense. They will replace and pay restitution for what the kid did.
If i had resorted to violence i would have a broken car and be in jail.
Its going to cost the shop about $4500 in parts, labour and restitution.
If i had resorted to violence i would have a broken car and be in jail.
Its going to cost the shop about $4500 in parts, labour and restitution.
Resident Import Elitist
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)
- Series8217
- 1988 Fiero Track Car
- Posts: 6078
- Joined: Thu Jun 02, 2005 9:47 pm
- Location: Los Angeles, CA
-
- Posts: 599
- Joined: Sun Feb 19, 2006 12:53 am
- Location: puyallup washington
- Contact:
donk_316 wrote:Stimpy is partially correct. I wrote up a contract that covers my ass and my car at the shops expense. They will replace and pay restitution for what the kid did.
If i had resorted to violence i would have a broken car and be in jail.
Its going to cost the shop about $4500 in parts, labour and restitution.
no no, u get ur stuff first, then a month later when everything is cool, u resort to violence, it solves everything!
jail? no no no no no, ur alibi was u where at my house, kicking it. ask stimpy he was there too and saw u, hell so did product and series. we where all there that night. playing bible adventure nintendo games.
-
- Posts: 316
- Joined: Wed Aug 10, 2005 2:35 pm
- Location: Indiana
From what you've said it definitly looks like you are going to be getting the better end of the deal, but I'm not sure how I would feel about the shop after having my trust violated like that. I mean I would be super pissed if that happened to me and all I have is a couple of slow ass Fieros. If that happened to me, and I had a high end sports car I would be out for blood. It would be like if you took your wife to the doctor, and he fucked her then told you it wasn't his fault cause he had a hard on and your wife was the only lady around.
Ouch.. Yeah, I'd be pissed. I remember when I was working at a shop and an employee there had a 1970 Cutlass.. He went for lunch and when he came back he was like "Wtf is my car" "I saw Johnny going through you toolbox, I think he said he was going to get his girlfriend".. I got beaten for that, and I only put 20km on the stupid thing.. 

Update!
The turbos are blown and clutch is fried. Looks like he boosted a little too early when she was cold and fragged the ceramic wheels right off... which means he couldnt have beat on her too bad since it was basically running NA the whole time
Clutch is shot because he had no idea how to drive a twinplate and burnt through it by slipping it too much.
Soo... i get to upgrade to better turbos and slicker clutch for free... upgrade my injectors and remap at my expense... can you say 500hp at the flywheel? hmm.
The turbos are blown and clutch is fried. Looks like he boosted a little too early when she was cold and fragged the ceramic wheels right off... which means he couldnt have beat on her too bad since it was basically running NA the whole time
Clutch is shot because he had no idea how to drive a twinplate and burnt through it by slipping it too much.
Soo... i get to upgrade to better turbos and slicker clutch for free... upgrade my injectors and remap at my expense... can you say 500hp at the flywheel? hmm.
Resident Import Elitist
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)
-
- Peer Mediator
- Posts: 15751
- Joined: Wed Nov 24, 2004 11:13 pm
- Location: In the darkness, where fear and knowing are one
- Contact:
Hey,
Not much to see on the turbos... just a blank space where the exh wheel was.
I dont really know where to go for turbos... I like the N1s.... but then the HKS GTSSs are basically the same thing or go for the HKS GT2530s and call it a day.
The 2530s spool about 4500 but pull like a pissed off frieght train and the N1/GTSS are definately no slouch either spooling around 4000
The N1s are good for 480-500hp and the 2530s are good for 600hp. at the crank.
The 2530s also respond really well to a 260degree 9.5mm cam upgrade. thats what the Mines Engine runs.
Any direction i go i will need to upgrade to 720cc injectors and Apexi PowerFC and if i go for the 2530s i have to upgrade the intank pump which is a breeze to do in a Skyline as there is an access hatch in the trunk.
I dunno. i have about 5 days to a week to think about it.
Not much to see on the turbos... just a blank space where the exh wheel was.
I dont really know where to go for turbos... I like the N1s.... but then the HKS GTSSs are basically the same thing or go for the HKS GT2530s and call it a day.
The 2530s spool about 4500 but pull like a pissed off frieght train and the N1/GTSS are definately no slouch either spooling around 4000
The N1s are good for 480-500hp and the 2530s are good for 600hp. at the crank.
The 2530s also respond really well to a 260degree 9.5mm cam upgrade. thats what the Mines Engine runs.
Any direction i go i will need to upgrade to 720cc injectors and Apexi PowerFC and if i go for the 2530s i have to upgrade the intank pump which is a breeze to do in a Skyline as there is an access hatch in the trunk.
I dunno. i have about 5 days to a week to think about it.
Resident Import Elitist
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)