Cleaning out the garage, what do you need?

greengoblin0129 · Post by **greengoblin0129** » Mon Mar 27, 2006 6:55 pm

I have a ton of Fiero parts for sale. I'm trying to make room in the garage so I can have more room to work on the Fiero. I have interior, exterior, wiring harness, trannies, and stock V6 engine parts. LMK what you need and make an offer.

Thanks, Ryan

edit: LMFAO, I type "2 . 8 parts" and it comes up as 2.8 parts

The Dark Side of Will · Mon Mar 27, 2006 7:00 pm

engine compartment wiring harnesses... got any?

any '88 parts?

whipped · Post by **whipped** » Mon Mar 27, 2006 7:02 pm

front fenders with GT moulding? Preferrably black? :p

befarrer · Post by **befarrer** » Mon Mar 27, 2006 8:50 pm

round side marker lights?

5 speed shifter? and Isuzu cables?

Fiero Power steering rack?

Flux Capacitor?

p8ntman442 · Post by **p8ntman442** » Mon Mar 27, 2006 8:52 pm

Just to let you guys know, I bought a ccomputer from him, and it arived in great shape, in only a few days. Best fiero parts seller ive dealt with.

greengoblin0129 · Post by **greengoblin0129** » Mon Mar 27, 2006 10:07 pm

The Dark Side of Will~ I have v6 wiring harnesses for auto and 4 speed, no 88 parts, sry

Whipped~I have 2 black fenders from an 86SE V6, so no GT moulding on them. I might have some GT moulding hidding some where, i'll let you know tomorrow if I find it.

befarrer~I have a 5 speed shifter with isuzu cables.

p8ntman442~Thanks for the comment, hope it works out for you.

Shoot me an offer on the parts. I also have paypal.

Thanks, Ryan

whipped · Post by **whipped** » Mon Mar 27, 2006 10:37 pm

greengoblin0129 wrote: Whipped~I have 2 black fenders from an 86SE V6, so no GT moulding on them. I might have some GT moulding hidding some where, i'll let you know tomorrow if I find it.

Are they all the same besides the moulding?

How much shipped to 32765?

FieroGuy9890 · Post by **FieroGuy9890** » Mon Mar 27, 2006 11:32 pm

Seats and front / rear aero bumpers that can fit an 85 2m4 (I love the look of the notchback aero's so i wanted to make one)?

Series8217 · Post by **Series8217** » Tue Mar 28, 2006 3:20 am

Got a driver's side notchback sail panel? I don't care what shape the acrylic is in, but I need a good frame. I don't care if the emblem is absent either.

crzyone · Post by **crzyone** » Tue Mar 28, 2006 3:57 am

Looking for leftr and right side power mirrors if you got them :thumbleft:

greengoblin0129 · Post by **greengoblin0129** » Tue Mar 28, 2006 7:59 am

whipped wrote:
Are they all the same besides the moulding?

How much shipped to 32765?

yea they are the same, i'll check shipping cost due to size.

crzyone~sry, already used them on my car

Series8217~yes, I have a couple good frames

FieroGuy9890~I do have rear and front areo bumpers. 3rears, and 2 fronts. Pickup only on thoes, it will cost more to ship it then what they are worth. lol

Ryan

Kohburn · Post by **Kohburn** » Tue Mar 28, 2006 8:14 am

you mentioned trannies, have any 4speeds?

greengoblin0129 · Post by **greengoblin0129** » Tue Mar 28, 2006 9:29 am

Kohburn wrote:you mentioned trannies, have any 4speeds?

I have a good 4speed and a good 5speed isuzu with shift cables and shifters for both.

donk_316 · Post by **donk_316** » Tue Mar 28, 2006 12:32 pm

I got a spare Indy 4.10!

Mach10 · Post by **Mach10** » Tue Mar 28, 2006 12:34 pm

You have a 4spd shifter in half-decent shape?

Like not rusted and seized?

And with little play in the pivots?

GIMMIEGIMMIEGIMMIE!!!

Kohburn · Post by **Kohburn** » Tue Mar 28, 2006 12:48 pm

greengoblin0129 wrote:
Kohburn wrote:you mentioned trannies, have any 4speeds?
I have a good 4speed and a good 5speed isuzu with shift cables and shifters for both.

is it a 3.65? 4.10? 3.32?

i don't want any 4.10's

greengoblin0129 · Post by **greengoblin0129** » Tue Mar 28, 2006 1:26 pm

Kohburn~lol, its a 4:10 out of an 84...found out the hard way because it came from an 86GT I parted out.

Mach10~yea its in good shape, make an offer. I was going to send it into the fierostore for the $40 credit...

dick1982 · Post by **dick1982** » Tue Mar 28, 2006 1:33 pm

do you have the shift console cap
mines falling apart

alltrbo · Post by **alltrbo** » Tue Mar 28, 2006 2:16 pm

I need a gas pedal! Everything that connects to the lever rod, that is. Got one?
It's a bit annoying to drive without it. :scratch:

greengoblin0129 · Post by **greengoblin0129** » Tue Mar 28, 2006 2:44 pm

dick1982 wrote:do you have the shift console cap
mines falling apart

4speed, 5speed, auto?

Real Fiero Tech

Cleaning out the garage, what do you need?

Cleaning out the garage, what do you need?

replys

Re: replys

Re: replys